Reusable Filter for CPAP DreamStation Go

If you suffer from allergies during spring and fall, you can use the Reusable Filter for the CPAP DreamStation Go, which removes normal household dust and pollen.

For installation, follow these steps:

• Lift the filter access cover and leave it up. If it is a replacement, pull the assembly where the used filter is located.
• If applicable, place a reusable blue pollen filter over a new disposable light blue ultra-fine filter and snap them together until you hear a click.
• Reinsert the new assembly into the side of the device.

The Filter for CPAP DreamStation Go is reusable, so it should be changed every year and can be washed.

Periodically inspect the intake filters as needed to ensure they are clean and in good condition:

• If the device is running, stop the airflow. Disconnect the device from the power source.
• Remove the filters from the housing by gently squeezing them at their central part and detaching them from the device.
• Inspect the filters to ensure they are clean and in good condition.
• Wash the gray foam filter with hot water and a mild detergent. Rinse it well to remove any detergent residue. Let the filter air dry completely before reinstalling it. If the foam filter is torn, replace it. (Use only replacement filters supplied by Philips Respironics).
• If the white ultra-fine filter is dirty or torn, replace it.
• Reinstall the filters, placing the white ultra-fine filter first, if applicable.

The use of the Reusable Filter for CPAP DreamStation Go comes with the equipment and must be installed whenever it is operating.

CAUTION: A dirty intake filter can cause high operating temperatures that may affect the performance of the device.