Filtro CPAP espuma negra
  • Filtro CPAP espuma negra

External filter for CPAP and BIPAP

Ref: 1063091
€4.70
Tax included

Coarse particle filter for System One CPAPs from Philips Respironics.

Quantity
Disponible

External filter for dust and coarse particles compatible with Philips CPAP and BiPAP devices.

With normal use, you should clean the gray foam filter at least once every two weeks and replace it with a new one every six months.

CAUTION: A dirty inlet filter can cause high operating temperatures that may affect device performance.

Periodically inspect the inlet filters as needed to ensure they are clean and in good condition:

1. If the device is running, stop the airflow. Disconnect the device from the power source.

2. Remove the filters from the housing by gently squeezing them at their central part and detaching them from the device.

3. Inspect the filters to ensure they are clean and in good condition.

4. Wash the gray foam filter with warm water and mild detergent. Rinse it thoroughly to remove any detergent residue. Allow the filter to air dry completely before reinstalling it. If the foam filter is torn, replace it. Use only replacement filters supplied by Philips Respironics.

5. If the white ultrafine filter is dirty or torn, replace it.

6. Reinstall the filters, placing the white ultrafine filter first, if applicable.

Contains one unit.

1063091